Jeep Check Engine Light

Check Engine Light Service Jeep

What do you do when you’re driving along in your Jeep and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Jeep owners, your heart sinks drastically because you may have absolutely idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, peaceful breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is advised that you get your Jeep checked quickly. Ignoring that warning could end up causing significant, extensive damage to expensive engine components.

When your Jeep 's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t appropriate, a computer turns on your check engine light. This amber or yellow light is ordinarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can instantly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Jeep auto repair mechanics at Kahlo Chrysler Dodge Jeep Ram. There are likewise a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the definitely appropriate issue and repair it.

What could cause the check engine light to come on in a Jeep?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Also, the check engine light could likewise be a warning of a significant problem that could cause serious damage to your engine and come with a hefty and costly repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow usually means something less serious but a flashing check engine light reveals that your vehicle’s engine is in serious trouble and helpful service is necessary quickly. If your check engine light is flashing in your Jeep, we extremely advise not to drive the car and schedule Jeep service today. Below is a list of the most typical reasons your check engine light can come on:

• New Spark Plugs or Plug Wires are needed for your Jeep. The spark plugs are the part of your engine that ignites the air/fuel combination in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will undergo a conspicuous poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more costly repairs.
• One of the most typical and frequent cause is that your Jeep gas cap is loose, damaged or missing. The gas cap for your Jeep serves various purposes. It prevents dangerous gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What occurs if you have a defective fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more costly. Luckily, to change a gas cap isn't costly. If your check engine light turns on promptly after you put gas in your Jeep, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your Jeep has a vacuum leak. Each Jeep has a vacuum system that performs a wide variety of functions. The vacuum system still helps lower unhealthy emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Jeep is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Jeep is having trouble starting, idling rough or has a sudden speedy replace in the position of the throttle pedal, this could be a vital sign of a defective mass airflow sensor.
• The battery is low or dead. The battery in your Jeep is each important. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of Jeep you drive, but check our current service coupons and specials.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your Jeep ’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is normally caused by regularly neglected maintenance, which is why Kahlo Chrysler Dodge Jeep Ram offers a free multi-point examination with each Jeep service. If you have an issue with your catalytic converter and don't get it repaired, your Jeep will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other perilous problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your Jeep if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound familiar, bring your to Jeep and have our team of talented certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could help you save substantially from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more expeditiously and your vehicle will be less efficient when it comes to fuel economy. So what occurs if I don’t change your O2 sensor? A defective sensor can not only affect your miles per gallon, but it can cause serious damage to your catalytic converter and your Jeep 's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the exactly correct combination of air and fuel that enters the cylinders in your engine. A defective O2 sensor can still cause a car to fail an emissions test.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we propose that you pull over and contact Kahlo Chrysler Dodge Jeep Ram to assist determine if your car is safe to drive in or if we propose a tow truck. Since any check engine code has its own level of severity, it is generally difficult to predict how many miles you can be safe in driving with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Jeep is the check engine light. The check engine light is part of the essential onboard diagnostics system, and displays in a variety of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Jeep. Some of these essential duties include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of different things. It can be as simple as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your Jeep, contact Kahlo Chrysler Dodge Jeep Ram. Contact Kahlo Chrysler Dodge Jeep Ram today! Our Jeep service department can support you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the appropriate code reading and diagnosis. The average cost for a check engine light diagnosis & testing is generally between $88 and $111. The good news, Kahlo Chrysler Dodge Jeep Ram offers completely complimentary multi-point inspections and free diagnostics, in most cases, to assist determine the cause of your check engine light.

Will the check engine light reset itself?

The check engine light on your Jeep will frequently shut itself off if the issue or code that caused it to turn on is fixed. For instance, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will instantly turn itself off. Again, if your catalytic converter is working accurately, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Jeep light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Kahlo Chrysler Dodge Jeep Ram so the light and code can be double-checked and reset.

Jeep Check Engine Light

If the check engine light in your Jeep starts flashing, that means that the problem needs attention expeditiously and your Jeep should be brought in instantly. A flashing light indicates that the problem is very serious and if not taken care of expeditiously may result in significant and serious damage to the vehicle. This blinking light frequently indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can promptly raise the temperature of the catalytic converter to a point where damage is likely, requiring an costly and considerable repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A damaged, old or dirty spark plug can cause the engine to misfire. If the problem is completely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is invariably flashing, please contact our team of automotive experts at Kahlo Chrysler Dodge Jeep Ram quickly by calling 4632326531.

Jeep Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are different typical causes including something as simple as a loose gas cap. Other often typical reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, faulty head gasket, broken oxygen sensor, a malfunction with the fuel injection system, or broken spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Jeep Certified Technicians and the certified service protocol to isolate the root problem and absolutely repair it as necessary to restore factory specifications. When this results, the Check Engine Light turns off, and you can leave the service center knowing that your Jeep issue was totally fixed.

Every Jeep was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its vital systems. The quick sensors are continually detecting conditions while sending essential data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, sadly that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Kahlo Chrysler Dodge Jeep Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Certified Service professional.

Jeep Check Engine Light Codes

The check engine light turning on can be quite intimidating, exceptionally to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your. There are hundreds of different codes that your check engine light can correctly represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your vehicle and will also allow that essential Check Engine Light to do what it is really supposed to do: be your guide. Sadly, apparent and helpful vehicle symptoms do not consistently accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

• Computer output circuit issues
• Fuel and air metering systems problems
• Transmission issues
• Old Battery
• O2 Sensor
• Bad Spark Plugs
• Ignition system faults
• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues

This is why it is important for someone who does not have a lot of prevailing automotive knowledge to not assume what a code means. Call Kahlo Chrysler Dodge Jeep Ram at 4632326531 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out promptly by a proficient certified Jeep mechanic. If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away.

Is it safe to drive your Jeep with the check engine light on?

If the check engine light is flashing, this means that there is a serious issue and it is advised to service your Jeep promptly. This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is ordinarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. Call the experts at Kahlo Chrysler Dodge Jeep Ram by dialing 4632326531 so you can describe the issues. Or lessen your speed and bring your Jeep to our certified mechanics as soon as likely.